skip to main content
Model C

Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.

Model C There are 89 products.

per page
Showing 1 - 25 of 89 items
  • $310.00 In Stock

    Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (not included), and is backlit for improved visibility. Device holder or Smartphone Cradle included in some kits*. *See More Info. Be sure to select the correct machine when buying this part. (If not listed, that part is out of stock.) If buying a RowErg, SkiErg or...

    $310.00
    In Stock
  • $214.50 In Stock

    This is the damper-side cover for the Model C Indoor Rower.  Does not include the damper fan cover screws (order separately, part number 1231). See more info.

    $214.50
    In Stock
  • $121.00 In Stock

    For use with RowErgs, Model C, D & E Indoor Rowers. This kit includes 14 tooth quiet sprocket, axle, chain idler pulley, nickel chain with connectors and swivel, shock cord, 17mm bearing, 17mm bearing cup, 17mm bearing cup, screws and nuts.  Replaces the original Model C parts with smoother, quieter Model D parts.

    $121.00
    In Stock
  • $108.70 In Stock

    For use on all Model C Indoor Rowers. See more info.

    $108.70
    In Stock
  • $92.60 In Stock

    For use with Model C Indoor Rowers only. Includes the most common wear and tear parts to keep your Model C in top condition. See more info.

    $92.60
    In Stock
  • $59.25 In Stock

    For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.

    $59.25
    In Stock
  • $57.30 In Stock

    For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.

    $57.30
    In Stock
  • $57.30 In Stock

    For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.

    $57.30
    In Stock
  • $49.70 In Stock

    For use with all Model C and newer black Model D Indoor Rowers manufactured from July 2012–present. Includes caster wheels. See more info.

    $49.70
    In Stock
  • $47.10 In Stock

    This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.

    $47.10
    In Stock
  • $44.30 In Stock

    For use with Model C and black Model D Indoor Rowers manufactured from July 2012–present. Includes molded foot caps. Does not include hardware. See more info.

    $44.30
    In Stock
  • $40.45 In Stock

    For use on all Model C, D and E Indoor Rowers.  This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.

    $40.45
    In Stock
  • $37.40 In Stock

    For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...

    $37.40
    In Stock
  • $32.80 In Stock

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    $32.80
    In Stock
  • $32.30 In Stock

    For use with Model C Indoor Rowers and black Model D Indoor Rowers manufactured from July 2012–present. Measures 23.5 inches in length. Screws sold separately (part number 1253). See more info.

    $32.30
    In Stock
  • $30.35 In Stock

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    $30.35
    In Stock
  • $29.90 In Stock

    For use with Model C Indoor Rowers and black Model D Indoor Rowers manufactured from July 2012–present. Measures 19 inches in length. Screws sold separately (part number 1253). See more info.

    $29.90
    In Stock
  • $24.20 In Stock

    For use on the Model D and E Indoor Rower.

    $24.20
    In Stock
  • $16.60 In Stock

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    $16.60
    In Stock
  • $14.00 In Stock
  • $13.55 In Stock

    For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...

    $13.55
    In Stock
  • $12.50 In Stock

    For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.

    $12.50
    In Stock
  • $11.75 In Stock

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    $11.75
    In Stock
Showing 1 - 25 of 89 items