skip to main content
Model C

Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.

Model C There are 90 products.

per page
Showing 26 - 50 of 90 items
  • $10.35 In Stock

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1916, Chain with Sprocket. See more info.

    $10.35
    In Stock
  • $9.65 In Stock

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $9.65
    In Stock
  • $9.55 In Stock

    This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.

    $9.55
    In Stock
  • $9.55 In Stock

    This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.

    $9.55
    In Stock
  • $8.70 In Stock

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    $8.70
    In Stock
  • $7.55 In Stock

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    $7.55
    In Stock
  • $6.60 In Stock

    This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.

    $6.60
    In Stock
  • $6.25

    For use on the Model C, D and E Indoor Rower.

    $6.25
  • $5.50 In Stock

    For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.

    $5.50
    In Stock
  • $5.15 In Stock

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    $5.15
    In Stock
  • $4.95 In Stock

    For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. For machines manufactured prior to July 31, 2006.

    $4.95
    In Stock
  • $4.95 In Stock

    For use with updated Model D, Model E and Dynamic Indoor Rowers.  Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram For machine manufactured after July 31, 2006.

    $4.95
    In Stock
  • $4.55 In Stock

    For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.

    $4.55
    In Stock
  • $4.10 In Stock

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    $4.10
    In Stock
  • $4.00 In Stock

    For use with Model C Indoor Rowers. This is the plastic piece on top of the box frame that covers the opening where the chain passes through. Designed to prevent the chain from hopping off the sprocket.

    $4.00
    In Stock
  • $3.85 In Stock

    For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. See more info.

    $3.85
    In Stock
  • $3.85 In Stock

    For use with Model C and original Model D Indoor Rowers. Replacement caster wheel located on the front foot of Model C and original Model D Indoor Rowers. Used when picking up the back end of the indoor rower and rolling it like a wheel barrow.

    $3.85
    In Stock
  • $3.75 In Stock

    For use on all Model C, D, E, and Dynamic Indoor Rowers and the SkiErg. Using this knob instead of a nut makes it easier to take the monitor on and off of the equipment.

    $3.75
    In Stock
  • $3.40 In Stock

    For use on the Model C, D and E Indoor Rower. This is the end cap for the front of the indoor rower. See more info.

    $3.40
    In Stock
  • $3.10 In Stock

    For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013) is sold separately. See more info.

    $3.10
    In Stock
  • $3.10 In Stock

    For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.

    $3.10
    In Stock
  • $3.10 In Stock

    For use with Model A, B, C, D and E Indoor Rowers. This is the hard plastic cap that goes on the rear metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two per machine. Sold individually.

    $3.10
    In Stock
Showing 26 - 50 of 90 items