No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
Model C There are 87 products.
-
$310.00 In Stock
PM5 Monitor
Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (not included), and is backlit for improved visibility. Device holder or Smartphone Cradle included in some kits*. *See More Info. Be sure to select the correct machine when buying this part. (If not listed, that part is out of stock.) If buying a RowErg, SkiErg or...
$310.00In Stock -
$214.50 In Stock
1742: Damper Fan Cover Assembly—Model C
This is the damper-side cover for the Model C Indoor Rower. Does not include the damper fan cover screws (order separately, part number 1231). See more info.
$214.50In Stock -
$121.00 In Stock
1915: DRIVE CHAIN ASSEMBLY C/D/E
For use with RowErgs, Model C, D & E Indoor Rowers. This kit includes 14 tooth quiet sprocket, axle, chain idler pulley, nickel chain with connectors and swivel, shock cord, 17mm bearing, 17mm bearing cup, 17mm bearing cup, screws and nuts. Replaces the original Model C parts with smoother, quieter Model D parts.
$121.00In Stock -
$108.70 In Stock
1114: Flywheel Back Cover, Model C
For use on all Model C Indoor Rowers. See more info.
$108.70In Stock -
$92.60 In Stock
1711: Maintenance Kit—Model C
For use with Model C Indoor Rowers only. Includes the most common wear and tear parts to keep your Model C in top condition. See more info.
$92.60In Stock -
$72.45 In Stock
-
$59.25 In Stock
1941: Nickel Chain with Connectors
For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.
$59.25In Stock -
$57.30 In Stock
1125: Right Foot Bracket
For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
$57.30In Stock -
$57.30 In Stock
1124: Left Foot Bracket
For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
$57.30In Stock -
$47.10 In Stock
1102: Monorail Hanger
This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.
$47.10In Stock -
$44.30 In Stock
2847: Rear Leg, Black—Model C, D
For use with Model C and black Model D Indoor Rowers manufactured from July 2012–present. Includes molded foot caps. Does not include hardware. See more info.
$44.30In Stock -
$40.45 In Stock
1762: Track/Tape Assembly with Rivets—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.
$40.45In Stock -
$37.40 In Stock
1748: Monitor Pickup and Screw Kit—Model A, C
For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...
$37.40In Stock -
$32.80 In Stock
1042: Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
$32.80In Stock -
$30.35 In Stock
1929: Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
$30.35In Stock -
$24.20 In Stock
-
$20.80 In Stock
-
$16.60 In Stock
1724: Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
$16.60In Stock -
$14.00 In Stock
-
$13.55 In Stock
1771: Damper Replacement Kit
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
$13.55In Stock -
$12.50 In Stock
1723: Seat Frame Kit—Model C, D, E
For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.
$12.50In Stock -
$11.75 In Stock
1731: Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
$11.75In Stock -
$10.35 In Stock
1163: 14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1916, Chain with Sprocket. See more info.
$10.35In Stock -
$9.65 In Stock
1063: Flexfoot, Gray
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
$9.65In Stock -
$9.55 In Stock
1119: Guide Bracket, Right, Black
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
$9.55In Stock -
$9.55 In Stock
1135: Guide Bracket, Left, Black
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.
$9.55In Stock -
$9.55 In Stock
-
$8.70 In Stock
1025: Monitor Arm, Black
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
$8.70In Stock -
$7.55 In Stock
1756: Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
$7.55In Stock -
$6.60 In Stock
1103: Monorail Bolt Tube
This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.
$6.60In Stock -
$6.25
-
$5.50 In Stock
1003: Chain Guide—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.
$5.50In Stock -
$5.15 In Stock
2230: T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.
$5.15In Stock -
$4.95 In Stock
-
$4.95 In Stock
1501: Footstrap (Single) Short - Pre July 31 2006
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. For machines manufactured prior to July 31, 2006.
$4.95In Stock -
$4.95 In Stock
1517: Footstrap (Single) Long - After July 31 2006
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram For machine manufactured after July 31, 2006.
$4.95In Stock -
$4.55 In Stock
1011: Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
$4.55In Stock -
$4.10 In Stock
1725: Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
$4.10In Stock -
$4.00 In Stock
1002: Anti-Throw Device
For use with Model C Indoor Rowers. This is the plastic piece on top of the box frame that covers the opening where the chain passes through. Designed to prevent the chain from hopping off the sprocket.
$4.00In Stock -
$3.85 In Stock
1300: 17mm Bearing—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. See more info.
$3.85In Stock -
$3.85 In Stock
1308: Caster Wheel
For use with Model C and original Model D Indoor Rowers. Replacement caster wheel located on the front foot of Model C and original Model D Indoor Rowers. Used when picking up the back end of the indoor rower and rolling it like a wheel barrow.
$3.85In Stock -
$3.75 In Stock
1284: Monitor Mount Knob, 3/8-16
For use on all Model C, D, E, and Dynamic Indoor Rowers and the SkiErg. Using this knob instead of a nut makes it easier to take the monitor on and off of the equipment.
$3.75In Stock -
$3.40 In Stock
1009: End Cap—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the end cap for the front of the indoor rower. See more info.
$3.40In Stock -
$3.30 In Stock
-
$3.10 In Stock
1130: Axle for Chain Idler Pulley & Shock...
For use on the Model C, D and E Indoor Rower.
$3.10In Stock -
$3.10 In Stock
1044: Foot Cap
For use with Model A, B, C, D and E Indoor Rowers. This is the hard plastic cap that goes on the rear metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two per machine. Sold individually.
$3.10In Stock -
$3.10 In Stock
232: R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013) is sold separately. See more info.
$3.10In Stock -
$3.10 In Stock
1024: Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
$3.10In Stock -
$3.00 In Stock
1105: Hanger Bolt Tube
For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
$3.00In Stock -
$2.90 In Stock
-
$2.60 In Stock
-
$2.60 In Stock
167: Wooden Handle Grip—Model A, B, C
For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.
$2.60In Stock -
$2.50 In Stock
-
$2.00 In Stock
1008: Rear Bumper—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the bumper for the rear of the monorail. See more info.
$2.00In Stock -
$2.00 In Stock
1314: Slotted Chain Swivel Bushing—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This swivel bushing is installed at the swivel/handle end of the chain to prolong chain life and provide smoother rowing. See more info.
$2.00In Stock -
$2.00 In Stock
1754: Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
$2.00In Stock -
$2.00 In Stock
244: Handle U-bolt
For use with the handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D, E and Dynamic.
$2.00In Stock -
$1.65 In Stock
1204: Monorail Hanger Bolt 3/8-16 x 5-1/2
For use on the Model C, D and E Indoor Rower.
$1.65In Stock -
$1.55 In Stock
1007: Bottom Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
$1.55In Stock -
$1.35 In Stock
1203: Hanger Bolt 3/8-16 x 4
For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
$1.35In Stock -
$1.25 In Stock
1010: Bearing Cover
For use with Model C and D Indoor Rowers Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel.
$1.25In Stock -
$1.00 In Stock
1104: S.C.A.M.—Model C, D, E
For use on the Model C, D and E Indoor Rower. SCAM stands for Shock Cord Adjustment Mechanism. This part holds each end of the shock cord. Order two per machine.
$1.00In Stock -
$0.85
1210: Screw, 3/8-16 x 3/4
This is a foot bracket screw for use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured form July 2003–July 2006.
$0.85 -
$0.85 In Stock
1208: Screw, 3/8-16 x 1-1/4
This is the bottom seat roller screw used on the Model C, D and E Indoor Rower. See more info.
$0.85In Stock -
$0.65 In Stock
1131: End Cap Hook—Model C, D, E
For use on the Model C, D and E Indoor Rower. This part is used to hold the front end cap in place.
$0.65In Stock -
$0.65 In Stock
1253: Screw, 6-lobe, 1/4-20 x 5/8, epoxy
Used in various places on the Model C, D and E Indoor Rower.
$0.65In Stock -
$0.50 In Stock
1238: Screw, 6-lobe, 1/4-20 x 3/8
This is the handle hook screw on the Model C, D and E Indoor Rower. See more info.
$0.50In Stock -
$0.50 In Stock
1303: Spacer, Traveling Pulley—Model C, D, E,...
For use on all Model C, D, E and Dynamic Indoor Rowers. This is the 5/8 inch long spacer found in the return mechanism's travelling pulley. Also used in the monitor arm assembly on the Dynamic Indoor Rower.
$0.50In Stock -
$0.50 In Stock
1013: R8 Bearing Cup—Model C, D, E, Dynamic
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.
$0.50In Stock -
$0.50 In Stock
1012: 17mm Bearing Cup—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the rubber bearing cup that holds the 17mm bearing (part number 1300, sold separately). See more info.
$0.50In Stock -
$0.50 In Stock
240: Nut for the Handle U-bolt
This is the 1/4-20 heavy Nylock nut that is used with the wooden handle that came standard on the Model A, B and C Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle.
$0.50In Stock -
$0.40 In Stock
1251: Polydrive Rivet
This is used on the monorail hanger system on the Model C, D and E Indoor Rower.
$0.40In Stock -
$0.40 In Stock
1302: Seat Spacer—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the 1/4 inch long seat spacer used in the hardware of the seat assembly. Order six for each seat assembly. See more info.
$0.40In Stock -
$0.35 In Stock
1201: Screw, 6-lobe, 1/4-20 x 3/4
Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
$0.35In Stock -
$0.30 In Stock
1232: Washer, 1/4" x 1-1/4" BX Fender
This washer is used in the monitor mount and in the flywheel on all Model C, D, E and Dynamic Indoor Rowers and all SkiErgs. See more info.
$0.30In Stock -
$0.30 In Stock
1231: Screw, 6-lobe, 1/4-20 x 1/2, epoxy
Used in various places on the Model C, D and E Indoor Rower. See more info.
$0.30In Stock -
$0.30 In Stock
-
$0.25 In Stock
1248: Screw, 6-lobe, 1/4-20 x 3/4
Used in various places on the Model C, D and E Indoor Rower. See more info.
$0.25In Stock -
$0.25 In Stock
1209: Nut, 3/8-16, nylock
This is used on the seat frame on the Model C, D and E Indoor Rower. See more info.
$0.25In Stock -
$0.20 In Stock
1230: Damper Fan Cover Screw—Model C
This is the damper fan cover screw for the Model C Indoor Rower.
$0.20In Stock -
$0.20 In Stock
125: Washer, 3/8"
This washer is used in various places on the Model A, B, C, D and E Indoor Rowers.
$0.20In Stock -
$0.20 In Stock
1244: Nut, 3/8-16, nylock
Used in various places on the Model C, D and E Indoor Rower. See more info.
$0.20In Stock -
$0.20 In Stock
-
$0.10 In Stock
1212: Nut, No.8-32, nylock
This is a toe piece nut for use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–July 2006.
$0.10In Stock -
$0.10 In Stock
1249: Nut, 1/4-20, nylock
This is the nut used on the travelling pulley on the Model C, D and E.
$0.10In Stock -
$0.10 In Stock
-
$0.10 In Stock
